To suit the specific requirements of our clients, we offer these precision engineered
AMF panels in various sizes and specifications. Range of panel includes automatic
changeover with current limit, battery charger, power invertors, automatic changeover
and sine wave inverters. These can be PLC / Microprocessor / Relay based as per
requirement.
Synchronized AMF panels are extensively used for automatic changeover from mains
to stand-by generator at the time of power failure. Designed in compliance with
the international standards of quality, these synchronized AMF panels are ideal
for places where the generators are installed between main AC and load.
The ACCL (Automatic Changeover with Current Limit) allows unrestricted supply from
mains, when the main supply fails and stand by Generator supply is on. It connects
the DG power to each consumer in sequence & starts monitoring its load. The generator
current allotment is software calibrated & sealed in each ACCL as per buyer's specification
& is available on all load circuits. Whenever the load current exceeds the allotment,
power is automatically switched off for 8/10/12 seconds, and then automatically
restored.
HT & LT Switchboards
The power distribution boards offered are fixed single front/double front design
with feeders as per customer requirement to suite the applications. The distribution
boards offered are indoor type/ outdoor type as per the requirement.
Metering Panel Boards
Metering Panel Boards are widely used for domestic as well as industrial purposes.
Our Electrical Metering Panel Boards are designed with careful wiring and are excellent
in appearance. These Metering Panel Boards are made of 16/2mm/ 2.5 mm cold rolled,
mild steel metal clad, free standing, totally enclosed, cubicle type, fully compartmentalized,
outdoor / indoor installations and suitable for operation on 11kV, 3ph, 50Hz., and
AC earthed system. The panel contains the equipments and components complete with
bus bar interconnections, control wiring, designation labels, caution notices, EB
sealing and pad locking facilities wherever required.
Motor Control Centers
MCC are offered up to 1600 A operational current at 40 degree Celsius ambient Temperature
in single and double front design for 50 kA short Circuit Withstand Capacity and
from IP 52 to IP 65 degree of Protection. Form IV of separation as per IS: 8623
is maintained. Types of starters include Automatic Star Delta; Direct On-line, Soft
Starters, Variable Frequency Drives, Stator Rotor Starters and Autotransformer Starters.
Used for Special & General purpose machines, with Hydraulic / pneumatically controlled
PLC / Relay Based circuits.
Power Control Centers
We offer PCC panels which are used for varied industrial applications and provide
reliable and effective service. We fabricate highest quality power control centre
(PCC) panel, which are used to control the entire power supply. These panels are
artificial as client's specifications and requirements which very well get together
with the industry demands.
Power Control Centers are being designed and manufactured up to 4000A rating, suitable
for operational Voltage of 415V in a 3 phase 4 wire distribution systems with an
insulation voltage up to 660V at an ambient Temperature of 40 degree Celsius. The
form of separation as IS 8623 is FORM IV. Short circuit withstand capacity is 50
kA and degree of protection from IP 52 to IP 65; both of these parameters are type
tested. The switchboards offered are in fixed and semi draw-out type configuration
with single front design.
Power Distribution Panels
Distribution Panels or panel board is a type of component of electricity supply
system that is used for the division of electrical power feed into subsidiary circuits.
It provides a protective fuse or circuit breaker in a common enclosure. There is
provision of a main switch, one or more residual current devices or residual current
breakers, and over current protection (RCBO).The power distribution boards offered
are fixed single front/double front design with feeders as per customer requirement
to suite the applications. The distribution boards offered are indoor type/ outdoor
type as per the requirement. Can provide Incoming power distribution, with single/multiple
incomings with Copper/aluminum bus bar with insulation of PVC Shrinkage sleeve,
Single/Double door (Dust & Water free with degree of protection IP55/IP65) As per
IS: 8623.
Power Factor Control Panels- Capacitor / P F Control / APFC / RTPFC Panel
We provide all types of Power Factor Improvement Panel. Capacitor / P F Control
Panel maintain the power factor of the system by switching the capacitor banks as
per the requirements of the system. The APFC panel is automatic power factor correction
panel used to achieve the overall power factor near unity as per the electrical
requirement. The power factor correction capacitors are used for the same. The microprocessor
based controller is normally used to control the power factor automatically. These
automatic power factor control panel (APFC) are designed and urbanized using higher
techniques and are capable of saving utmost power and energy. This APFC Panel are
highly competent and precisely monitor the reactive power in power systems for saving
energy and can alter the system voltage as well as current. These panels are also
providing with capacitors along with series reactors to minimize the harmonic current.
Automation / PLC / Relay Control Panels
For Textile, Paper, Plastic, Pharmaceutical Plywood & various type of industries
with control such like as Temperature, Pressure, Flow, Motion control.
AC & DC Drive Control Panel
We are specialized in offering AC/DC drive control panels. Being easy to install
and sturdy in construction, these panels are widely used to control the sensitive
motor operations and machines, pumping operations and process control applications.
Our AC/DC drive control panels are available in models & Amps/ KVA rates of one
Amp to any required Amps.
Fire Fighting Panel
The control panels offered for the fire control system are to maintain the required
hydrant pressure in the pipe lines. The hydrant pressure is maintained with the
use of main pump, jockey pump & by the diesel engine. The controller offered for
the diesel engine is basically microprocessor based controller including alarms
for specific faults.
|